Netgear Ex3700 Extender Setup

The Netgear Ex3700 Wireless Range Extender provides a solution for extending your wifi range. It provides the same high bandwidth as Netgear's X6 router and other powerful routers. With the help of Netgear EX3700 Extender Setup you can extend the range to cover all dead zones in your home or office without sacrificing speed.

A Netgear Nighthawk X6S router has enough range to cover a home of 2500 square feet. The Netgear Ex3700 wireless range extender uses similar technology and can cover a similar range. Using two range extenders, however, will not provide you with 5000 square feet of coverage.

Netgear EX3700 Extender Setup Steps

Here’s how to complete Netgear Ex3700 Extender Setup with the Netgear using manual method:

1. Place your Netgear Nighthawk Ex3700 near your router and turn it on.

2. Connect the extender to a power supply next.

3. Wait for the Power LED to turn green.

4. Connect the Netgear Nighthawk Ex3700 network extender to a network.

5. Navigate to mywifiext net using a web browser on a computer or smartphone.

6. Netgear Genie configuration assistant appears.

7. Follow the on-screen instructions to connect your booster to your current WiFi network and move your extender.

8. If you get no or a bad connection, move the extender closer to your router and try again until the Link Status LED turns white.

9. Once you've determined the best location for your extender, connect your customers' devices to the expanded WiFi network.

Netgear  EX3700 Extender Setup With Push button (wps)

Steps for the Netgear Ex3700 Extender Setup with WPS, follow these instructions:

1. On the Nighthawk Ex3700 WiFi extender, turn it on.

2. Install the WiFi booster and router in the same room.

3. Connect your extender to an electrical outlet next.

4. Wait until the Power light turns green.

5. Press the WPS button on the extender.

6. Your router and booster are properly connected if the Netgear Ex3700 Link Status LED is white.

7. Adjust the position of your extender.

8. Take your WiFi-enabled PC or mobile device to an area with limited WiFi router coverage.

9. Connect to the expanded network using a WiFi-enabled computer or mobile device.

The Netgear Ex3700 extender Setup with the WPS button is now complete.

How Do I Update My Netgear EX3700 Extender Firmware?

Is your WiFi extender suddenly acting strangely? Is the appropriate speed still not being provided despite a successful Netgear extender configuration? If this is the case, you should upgrade the Netgear Ex3700 firmware right away. Netgear Extender Firmware is a set of instructions embedded in the hardware device.

1. To begin, turn on your WiFi extender.

2. Connect a router to the Nighthawk Ex3700 extender.

3. Then, open your preferred web browser.

4. Enter mywifiext net into the address field and press the enter key.

5. Enter your extender's login and password.

6. Select the Firmware Update option from the options menu.

7. After that, click the Check button.

8. If a new firmware version is available, choose yes to update the firmware.

Wait a few moments for the Netgear Ex3700 firmware to update successfully.

Netgear Ex3700 extender Features

• for giving up to 3mbps connection.

• Smart Connect: for securely connecting every device to a WiFi band (5GHz or 2.4GHz).

• Quad Core Processor: for extending hard-wired and wireless connections for improved streaming and hassle-free gaming.

• High-Performance Antennas: for maximum efficiency.

• Ethernet Plugins: for connecting wired devices to your home WiFi network, such as gaming consoles, multimedia streaming set-top boxes, or smart televisions.

• USB port: used to connect your printer.

• Analytics app for Android devices: signal strength, network optimisation, and channel interference.