Natural Ways to Clean and Unclog Drains Without Chemical Cleaners

Clogging of drains happens to everyone. It is a very common issue. However, it should not be delayed and you should deal with the issue on time in order to avoid future problems. If you do not handle drain clogging issues on time, they can become bigger enough to create a hassle for you and you will have to call a professional plumber to unclog the drain.

Most of the clogged drains are simple to handle. They do not need to call a plumber to handle them. However, there are some severe cases as well where you need to hire the best plumber near you.

There are many different products available in the market for drain cleaning and unclogging. However, the negative aspect of these cleaning products is that they can be very harmful to human health. These chemicals are also very harsh on your bathroom fixtures and plumbing etc. therefore, it is advised that whenever you face a clogged drain, do not reach for a chemical cleaner and try to use some natural methods instead.

Natural Ways to Clean and Unclog Drains

Many homeowners when facing tough clogs in the bathroom or kitchen, reach out for toxic chemical cleaners to make their task easy and get rid of the clog quickly. These cleaners may help you now but they will prove to be very harmful to your plumbing in the future. Therefore, we suggest that you should try to avoid the use of chemicals for drain unclogging as much as possible. Here are some natural remedies that you can use to get rid of even the toughest stains.

1. Dish Soap and Hot Water

Most kitchen sink drains get clogged due to the grease going inside the drain for a long time. The grease forms a buildup inside the drains that cause clogging. These types of clogs could be unclogged by using a very simple element which is dish wash soap. Dish wash soap is made of ingredients that help to get rid of grease. Follow the below steps for this method.

Take a kettle and fill it with some water.
Let it boil for some time until it reaches the boiling point.
Now take the dish wash and pour down a generous amount of liquid in the sink drain.
Let the liquid rest inside for some time to dislodge the grease.
Now pour hot water into the drain to flush away everything.
You may need to repeat the process twice or thrice to get the desired results.

2. Try Using a Plunger

A plunger is a very simple tool that is found commonly in nearly every house. If not then it is easily available at a nearby local store. A plunger is used to pull out gunk, grease, or build-up inside the drains. Follow the below steps for using a plunger to unclog drains.

First remove the drain cover or top cover on the sink.
Now let the water run in the sink for some time so that an inch of water gathers in the sink.
Place the plunger on the top of the sink drain and hold it downwards in order to make a tight seal between the plunger and the sink drain.
Now start pulling the plunger up and down vigorously to create pressure.
The pressure will help to dislodge the clog and clear the drain of any build-up inside the pipes.

3. Use Baking Soda with Boiling Water

Baking soda is also known as sodium bicarbonate. It is a natural grease cleaner that cuts through grease and gunk in the pipes and drains. Baking soda is a common element found in nearly every kitchen. It is a very powerful chemical-free compound for unclogging and cleaning drains.

Perform the following steps for this method.

Take a kettle and fill it with water.
Let the water boil for some time until it reaches the boiling point.
Pour down the boiling water into the drain so that the grease and gunk will melt down a bit and loosen.

Boil some more water.
Now pour 1 cup baking soda into the drain.
Let the baking soda rest inside for some time.
After that, pour some more boiling water inside the drain.
Now use a plunger to plunge up the gunk that has been loosening up with baking soda and boiling water.

4. Use a Coat Hanger

A coat hanger could also be useful for unclogging drains. The coat hanger is made of wire that will help to pull out debris and build up or anything stuck inside causing the clog. Perform the following steps for this method.

First you have to straighten up the wire hanger with the help of nose pliers. Make it a long wire with a hook at one end.

Now enter the hooked end of the wire into the drain while rotating it in a circular direction.
Rotate and wiggle the hanger inside when you reach a point where there is resistance.
Now pull out the hanger wire slowly and see if there is some gunk on the hooked end.
Repeat until all the debris is removed and the drain becomes clean of any build-up and gunk.
This method should be used carefully because the wire hanger can push the clog deeper into the drain if not used properly and carefully.

Final Words

Regular drain cleaning is the best way to keep your drains clear and free of clogs. Implement methods that will help prevent the buildup of grit and gunk inside the drains.