How to Setup Wavlink Ac1200 Extender?
11 days ago
3 min read

How to Setup Wavlink Ac1200 Extender?

Your best option in terms of internet issues is the Wavlink AC1200 Extender Setup. It always works well to get rid of dead spots in your house. Set up your network to offer a more dependable, secure, and quick internet connection. All of your devices are compatible with Wavlink extenders. Any device, including smartphones, smart TVs, and even Roku, is compatible with Wavlink. In this article, we'll go over the procedures you must follow to set up your Wavlink booster.

The Wavlink AC1200 configuration instructions are as follows:

  • Unpack your wavlink AC1200 and then turn it on.

  • When you press the power button, keep an eye out for the power LED to turn entirely green.

  • Do not forget to maintain the booster near the router.

  • Connect by setting up an AP extender.

  • After inputting Ap.setup or 192.168.10.1, hit the enter key to launch any web browser.

  • Enter your personal information to log in.

  • Make sure you follow the directions to complete the installation.

  • Your repeater can now be moved to its new location because it has been unhooked.

You can manually finish the Wavlink AC1200 setup process in this manner. Let's attempt the WPS setup if you experience any issues with the manual setup.  

Wavlink AC1200 Setup Via WPS Method

Let's examine a different method for setting up your Wavlink repeater, the WPS method, which is regarded as the quickest and simplest. You will be able to set up your extender in under two minutes without entering a username, password, or SSID once you have finished the Wavlink AC1200 setup through WPS. Now let's look at how the WPS method functions.

The Wavlink AC1200's WPS setup instructions are as follows:

  • Wavlink AC1200, turn it on.

  • Ensure that it is not too far from your home's router.

  • Just press the WPS button on your booster.

  • On your home router, press the same WPS button now.

  • You've probably successfully configured your repeater when it shows three constant green lights.

  • The repeater can be unhooked and placed wherever you like.

That's how the Wavlink AC1200 WPS setup is finished.

Troubleshooting steps for Wavlink AC1200 Setup

  • For some IP 192.168.10.1 gateways, the WPS button is by default deactivated. Visit the Wavlink wifi extender setup management website to set up your extender if you are unable to connect using the WPS button.

  • Make certain that the extender is placed close to your wireless router.

  • If not, your upgraded network's performance will differ significantly. Keep it and your router at least one meter apart.

  • Make sure the extender is not close to any electronic interference devices. Avoid using Bluetooth-enabled devices including cordless phones, microwave ovens, and baby monitors.

How to update firmware on my Wavlink AC1200?

To fix any problems you might encounter when utilizing your extender, you must update the firmware on your Wavlink AC1200 (whether it is not providing the desired speed or something else). It offers new features that will assist you allay your worries as well as additional security features.

Follow the steps below to upgrade the firmware on your Wavlink AC1200:

  • Wavlink AC1200, turn it on.

  • Take a look at any mobile device.

  • Locate Ap.setup.

  • After choosing settings, choose firmware upgrade.

  • To finish the firmware upgrading operation, follow the steps.

  • Don't unplug the booster while it is waiting because it will take a moment.

This explains how to upgrade the Wavlink AC1200's firmware.

How to reset Wavlink AC1200?

You must do a factory reset on your booster in order to regain your admin username or password if you have forgotten them. When you reset the Wavlink AC1200, it clears all of your personal data, including passwords, usernames, and SSIDs, to get your extender ready for a new setup process. A sharp object with a firm point, like a paper clip or a needle, is required to complete the factory reset process.

Let’s see how to reset your Wavlink AC1200 Setup:

  • Turn on after removing your Wavlink extender.

  • You will find a factory reset hole on the side of the extender.

  • Take a toothpick, paper clip, hard pin, or something similar.

  • For 8 to 10 seconds, press the reset button next to the hole.

  • Now your Wavlink extender  has been successfully reset.

Use our toll-free phone or live chat if you still need assistance with your Wavlink AC1200. We'll always be here to help you out with any issues.