FeedingTrends
Essential Information About Wavlink Ac1200 Extender Setup
6 days ago
4 min read

Essential Information About Wavlink Ac1200 Extender Setup

Wavlink AC1200 extender is also called the other name of dual-band WiFi range extender. With its powerful technology features you enjoy the fast and reliable internet connection in all the areas of the office and house. To enjoy all the benefits and learn all information about Wavlink devices, read the below description carefully. 

Wavlink AC1200 Setup

Wavlink AC1200 Extender Pros 

  • Wavlink AC1200 extender device helps to kick off all the dead spot areas of your house and office. 

  • The login and setup process of the AC1200 extender is straightforward. 

  • Wavlink AC1200 WiFi range extender supports dual frequency bands. 

  • The 2.4GHz band consists of 300Mbps speed. 

  • The 5GHz band of the Wavlink extender consists of 867Mbps speed. 

Access Wavlink Extender Web Management Page

  • First, place the power plug of the Wavlink AC1200 WiFi range extender in the electrical power socket. 

  • Now, take the computer and connect it to the Wavlink WiFi range extender network. 

  • Next, open the web browser and enter wifi.wavlink com in the URL bar. 

  • After that, fill in all the details shown on the web management page. 

  • If you don’t know the details then check the manual booklet which comes with your Wavlink range extender device. 

With the help of these steps, the Wavlink extender setup process is successfully done. 

Wavlink AC1200 Extender Configuration 

There are two ways to do the configuration process of the Wavlink WiFi range extender. 

Method 1: By Pressing The Wavlink AC1200 Extender WPS Button 

Note: While doing this method, make sure that your main router must support the WPS button. 

  • Initially, settle the Wavlink AC1200 extender power plug in the power socket. 

  • Make sure that your extender and router must be placed closer to each other when you are doing this method. 

  • Now, push and hold the WPS button of the Wavlink AC1200 extender. 

  • Next, in 10 to 20 seconds press the main router WPS button. 

  • Then, the WPS LED starts blinking on both the extender and router gadget. 

  • Therefore, it means the extender and router devices are successfully linked with each other. 

Method 2: Connect Extender To Router Via An Ethernet Cable 

  • Initially, link the ethernet cable to the Wavlink AC1200 extender ethernet port. 

  • After that, join the remaining end of the ethernet wire to the existing router ethernet port. 

  • Now, check that your computer (WiFi-containing gadget) must be connected to the Wavlink extender network. 

  • Then, plug the Wavlink extender into an electrical power socket. 

  • In the end, wait for a few minutes to see the solid blue LED on both the extender and router device. 

Causes Why You Face Issue In Wavlink Extender 

  • The Internet connection does not work properly. 

  • The extender and router are not placed in the same room. 

  • From the main router, the extender is unable to get a WiFi signal. 

  • The power plug of the wavlink AC1200 extender does not perfectly settle in the power socket. 

  • Due to an outdated software of Wavlink extender. 

To resolve all these common issues, consider the below solution tips to resolve them. 

Resolve All Wavlink Extender Common Issues 

Identify Router And Extender Placement 

You face an internet connection issue, when you place your both extender and router closer to the metal appliances. Metal appliances absorb all the WiFi signals which come from the extender and router. To resolve this issue, make sure you don't locate your extender near metal objects. The central location of your office and house is the ideal placement for your device. 

Enhance Wavlink AC1200 Extender Software 

  • First, open the web browser on your computer. Make sure your computer must be connected to the Wavlink extender network. 

  • After that, enter wifi.wavlink com and visit the Wavlink extender web management page. 

  • Now, look or search for an administration option and then hit on the enhanced software option. 

  • In the end, wait for a short while to download or install the file on your laptop or computer. 

Factory Reset Wavlink AC1200 Extender 

To reset your extender device, look for the reset hole button. At the back side of the wavlink extender, you get the reset button. Now, push that button, by hairpin, for 10 seconds. Further doing this, all the Wavlink LEDs will turn off. Therefore, it means your Wavlink AC1200 extender device is now completely reset.

 

Note: After the AC1200 extender reset, you will need to do the Wavlink AC1200 setup process again. 

After the entire study of this page, you will be able to do the login and setup process of the Wavlink extender by yourself without taking any technician experts.