MSRM wifi extender reset is the process of restoring the device to its default settings. This is done when the device is not functioning properly or when the user wants to start over with a clean slate. The reset process will erase all the previously configured settings, including the Wi-Fi network name, password, and other configurations. Once the device is reset, it will return to its original state, and the user can set it up again according to their requirements.
The exact steps to reset an MSRM WiFi extender may vary depending on the model, but generally, you can follow these steps:
Locate the reset button on your MSRM WiFi extender. It is usually located on the bottom or back of the device.
Use a paper clip or a small tool to press and hold the reset button for at least 10 seconds. Keep holding the button until the device's lights start flashing.
Release the reset button and wait for the MSRM WiFi extender to reboot.
Once the device has finished rebooting, it should be reset to its default factory settings.
Note: Resetting your MSRM WiFi extender will erase all of the customised settings you have made on the device. You will need to set it up again as if it were brand new.
Why is there a need to reset MSRM wifi extender?
There are several reasons why you may need to reset your MSRM WiFi extender:
Network connectivity issues: If your MSRM WiFi extender is not connecting to your network, resetting it may help resolve connectivity issues. This can happen if the extender has lost connection to the main router, or if there is a problem with the extender's settings.
Firmware updates: Sometimes, firmware updates may require a reset of the MSRM WiFi extender to apply the changes. In such cases, resetting the extender will ensure that the updated firmware is installed properly and the device functions correctly.
Configuration changes: If you have made changes to the settings of your MSRM WiFi extender and it is not working properly, resetting it to its default settings can help resolve the issue. This will erase any changes you made to the settings and allow you to start fresh with the device.
Security concerns: If you suspect that your MSRM WiFi extender has been compromised or hacked, resetting it to its factory settings can help remove any malicious software or settings that may have been installed.
Overall, MSRM WiFi extender reset can help resolve a wide range of issues and restore the device to its optimal performance.
Common issues during MSRM wifi extender reset
Here are some common issues reported during MSRM WiFi extender reset include:
Difficulty accessing the reset button: Some users report that they have trouble locating the reset button or pressing it down firmly enough for the reset to work.
Failure to reset: In some cases, the MSRM WiFi extender may not reset properly, leaving users unable to connect to the network or experiencing other issues.
Lost settings: After a reset, some users report that their MSRM WiFi extender has lost its previous settings, such as the network name and password, requiring them to reconfigure the device.
Connection issues: After a reset, some users report that they are unable to connect to the MSRM WiFi extender, even though the device appears to be working properly.
Slow or weak signal: Some users report that even after resetting the MSRM WiFi extender, they still experience slow or weak signal strength, indicating that there may be other issues affecting the device's performance.
What are the steps to resolve MSRM wifi extender reset issues
Here are some general steps that can help you in resolving MSRM wifi extender reset issues:
Check the power supply of the wifi extender. Ensure that the device is connected to a power source and that the power source is working correctly.
Check the network connection of the wifi extender. Ensure that the device is connected to your home network, and the internet is working fine.
Try resetting the wifi extender. You can reset the device by pressing the reset button on the device or by using the device's web interface.
Ensure that you are following the correct process for resetting the wifi extender. The reset process may vary depending on the model of your wifi extender.
If the wifi extender is still not resetting, try contacting MSRM customer support for assistance. They can help you troubleshoot the issue and provide you with a solution.
How to Setup MSRM wifi extender after a reset?
Here are the general steps on how to setup an MSRM WiFi extender after resetting it:
Connect your MSRM WiFi extender to your computer or smartphone using an Ethernet cable.
Open a web browser and type in the default IP address of the MSRM WiFi extender. This is usually 192.168.10.1.
Login to the MSRM WiFi extender using the default username and password. The default username is "admin" and the default password is "admin".
Follow the setup wizard to configure your MSRM WiFi extender. Make sure to choose the correct wireless network that you want to extend.
Once you have completed the setup, disconnect the Ethernet cable and connect your devices to the MSRM WiFi extender.
Note: If you have changed the default login credentials before resetting the MSRM WiFi extender, use the new login details to access the setup wizard.