For setting up a Netgear AX1800, everything is required. Take a look at one of the most popular extenders right now. You can get a strong WiFi network with plenty of capacity, quick speeds, and improved coverage with a later configuration of the Netgear EAEverything X15. With a speed of up to 1.8 Gbps, the Netgear AX1800 EAX15 WiFi 6 mesh extender provides flawless coverage throughout your home. Because there are four streams, there is less interference.
Steps for the Netgear AX1800 Setup:-
The Netgear EAX15 needs to be connected to a power source.
Place both the extender and router in the same location.
Watch as a steady green light emanates from the power LED.
Any web browser should be set up to access mywifiext.net.
The Netgear Installation Assistant page is visible on the screen.
To finish the procedure, adhere to the directions displayed on the screen.
When all of the LEDs on the AX1800 turn solid green, the configuration is complete.
Then, unplug the extender and replug it in the desired location.
You have the option of manually configuring your Netgear Nighthawk EAX15 or using a web browser. However, we'll show you how to set up your wifi booster with a wirelessly secured setup button in the article that follows.
Netgear AX1800 Setup with WPS method:-
Follow the instructions for Netgear AX1800 Setup via WPS Method:-
It is time to turn on the Nighthawk extender.
Place your AX1800 near the existing router.
A green power LED will be present.
On the EAX15, select the WPS and click it.
Moreover, enable WPS on your wireless router.
Watch for the LEDs on the extender to turn green.
Now that the setup procedure has been finished entirely.
By following these instructions, you can configure your Netgear Nighthawk EAX15 with the wifi protected setup in about two minutes. In the blog that follows, we'll go through how to configure your wifi booster using the Nighthawk app.
Netgear EAX15 AX1800 Firmware Update
Following Netgear AX1800 Setup, a collection of programmes known as firmware is installed on hardware. Occasionally, Netgear will send you the most recent firmware updates to assist you if a problem occurs while using the extender. These upgrades are also useful for keeping up security barriers and solving issues. In this section, we'll look at installing firmware.
Follow these Instructions for Netgear EAX15 AX1800 Firmware Update :-
Start up the Netgear EAX15.
To connect to any mobile device, use wifi.
Navigate to www.mywifiext.net using a browser.
The Netgear login page has now opened.
Enter your SSID, username, and other private information.
Select "Firmware Update" from the "Settings" menu.
Taking care to avoid interrupting Netgear AX1800 setup by unplugging the device.
You may acquire the newest security features as well as other benefits by updating your firmware. How to execute a factory reset on your extender will be shown in the article that follows this one.
Netgear EAX15 AX1800 Reset process
When someone needs to recover an admin password they frequently perform a factory reset. Your admin password, username, SSID, and other personal information will be deleted after the factory reset procedure. You require a sharp item, such as a needle or toothpick, to do a factory reset on your Netgear EAX15 device. Let's examine the factory reset process in more detail.
Follow the steps for Netgear EAX15 Reset process :-
Activate a mobile device, such as a laptop, tablet, or smartphone.
Pick up a toothpick or another hard, pointed object.
Behind a little hole, locate the extender's reset button.
Use a toothpick to depress the reset button for ten seconds.
Your Netgear EAX15 will reboot in a minute and be prepared to begin the new setup procedure.
You may reset your Netgear Nighthawk EAX15 AX1800 in this manner. You can contact our technical support team by live chat or our toll-free phone if you come into any problems during the setup, firmware update, or reset procedure.